All broadband and network routers generally use the IP address 192.168.1.1. IPods, PCs and other devices can find the router without using the IP address. Computers, printers, and other devices are configured to use the same IP address and do not use the router, but this is rare.
There are many tutorials on the Internet to find out why the router is not connecting to the Internet. Some of the tutorials are common home networking mistakes that should be avoided, the tutorial for IP networks and many others.
Most likely you have different NAT types in each location. To complicate matters, NAT is not standardized and there are several implementations. In an ideal world, the documentation I read about setting up SIPs would be fine, since UDP punching would support port forwarding of UDP traffic. But as we often find, this is never the case …
By the way, an important fact about wireless routers is that they act as “firewalls”. A firewall is software or hardware that prevents hackers from hacking your system. The router brings an extra level of security between you and them.
Plan the location of your router. If you can not pull the cable from your modem to another room where you want to place your router, simply transfer this device to the Internet modem.
The default IP address of your Linksys router is 192.168.1.1. You can also check your original Linksys router support documents to verify the IP address of your router model. These will ship with your Original Linksys Router Kit, which includes Linksys router installation media, instructions, and connection details. Since it is natural for you (actually for all of us) to move such a stack of documents or to forget the IP address, you need to know how to find out.
As part of the installation, you will normally need to provide a local IP address, eg. 192.168.0.1 to configure the basic router settings. Most options can be retained by default, except for the Service Set Identifier (SSID) and encryption settings, which are discussed below.
On the Wireless tab, configure the wl0 interface and make sure that the SSID is set to the SSID of the primary router. Configure the channel and mode to be the same as the host router. Set the wireless mode to “Repeater” and the network setup option to “Bridged”.
It should be noted that only qualified network system administrators should have access to the 192.168.two.1 properties and their features, since creating changes can affect IT systems that are integrated throughout the network. Similarly, any attempt to resolve a difficulty or problem with this IP address must be left to the administrator or the qualified / concerned personnel.
You will see a list of manufacturers and devices, and all you have to do is find your printer to install the drivers. If your printer is not listed, you will need to download the drivers from the manufacturer and then use the Find Disk button to find the appropriate driver. Once the driver is selected, click Next and select the desired options from the following menus. When the sharing and other items are complete, click Finish. If everything is set up correctly, a test page should be printed.